Seeding list for Taree

[matt mead]

1 Dave Darby/ Shane Griffis Mitsubishi Lancer Evo 3
2 Chris Giddens/ Kam Baker Mitsubishi Lancer Evo 2
3 Stephen Slade/ Con Constantine Mitsubishi Lancer Evo 4
4 Peter Leicht/ James McDonald Mitsubishi Lancer Evo 3
5 Stephen Mitchell/ TBA Subaru WRX
6 Peter Neal/ TBA Subaru Liberty RS
7 Peter Ewing/ Andrew Kohlen Mitsubishi Galant VR4
8 Adam Kennedy/ Grant Kennedy Mitsubishi Lancer Evo 3
9 Glenn Farrant/ Matt James Hyundai Excel
10 Russell Dixon/ Jilie Boorman Honda Civic
11 Mark Dunn/ John Cunowiski Mitsubishi Galant VR4
12 Warren Roach/ Kylie Inskip Toyota Celica GT4
13 Evan Brawn/ Alan Baker Mitsubishi Lancer Evo 3
14 Richard Troup/ Russell Hannah Toyota Celica GT4
15 Lindsay Collits/ Shane Pearce Datsun 1600
16 David Roberts/ Mathew Mead Hyundai Excel
17 David White/ TBA Hyundai Excel
18 Nic Opie/ Nigel Walters Holden Gemini
19 Sean Kelly/ Penny Kelly Mazda RX7
20 Bruce McDougal/ Kellie Pearce Hyundai Lantra
21 Mark Fitton/ Carol Fitton Mazda RX2
22 Jeff Hawkins/ Paul Mountford Holden Gemini
23 Dave Addison/ Conrad Ackerman Ford Escort
24 Nathan Bootland/ Mitchell Bootland Holden Commodore
25 Andrei Artamonov/ Alex Pisarev Hyundai Excel
26 Troy O'Doherty/ Penny O'Doherty Triumph TR7
27 Ernie Martin/ Dave Moran Mazda RX7
28 Mathew Love/ Scott Keys Mazda RX7
29 Mathew Cullen/ Ben Cullen Hyundai Excel

[ae86trueno]

If your not first your last

:hoot:

[Crazy Dave]

Its easy to improve places that way. Can't believe how many rotaries are running up there. Glenn and Russel sandwich'd in a mix of awd's. One lonely Datsun. So different to South Coast events. Here we come.

[HMCA]

Andrie

Don't worry about looking for the front of the Tr7 in the rear view mirror,
You will only see quater panels and doors- its never straight.

Cheers Mick

[Whitey]

Mick,
no entry, is your car not back? :-(

[Crazy Dave]

Alright Whitey, we had a good tussle last year with decision going on what happened in the last stage, and we are one car apart this year. Here we go. Glenn, don't check times like last year and then watch out as you have a skdacian in the silly seat. I know his weaknesses (Beer basically).

Big day for me tomorrow. Rear wheel bearings have both had it, tie rod end is stuffed, heights of all 4 corners seems to be all over the place, steering rack needs by pass for fluid (p/s rack without pump), car needs a clean and some of the trim put back after the repairs to the A-pillar, sump guard needs to be straightenned, ignition leads need to be modified to suit late model coil pack on early model rocker cover, air filter brackets need to be made, trailer needs rear axle cut off and rewelded on straight etc etc.

I think I can...
I think I can...
I think I can...

[Whitey]

Big day for me tomorrow. Rear wheel bearings have both had it, tie rod end is stuffed, heights of all 4 corners seems to be all over the place, steering rack needs by pass for fluid (p/s rack without pump), car needs a clean and some of the trim put back after the repairs to the A-pillar, sump guard needs to be straightenned, ignition leads need to be modified to suit late model coil pack on early model rocker cover, air filter brackets need to be made, trailer needs rear axle cut off and rewelded on straight etc etc.

I think I can...
I think I can...
I think I can...

So I guess you aren't going to work them....

[ae86trueno]

ok were set, We just did a bit of late night testing to see how it was going to handle and passed with flying colours, all legal of course :|
Just need to get some interour trim for below the rear side window as ours went AWOL,

Me navigating is strange, very strange its going to take me a couple of stages to get used to.

Ben.